What attic and wall insulation costs
Published national ranges for blown-in insulation in an attic or existing walls, a typical blown-in job, and spray foam, per square foot.
On this page: 4 sections
The figures here are published national ranges from cost guides. They aren't quotes. Each one is a range at least two independent cost guides agree on. Use them to check a price, then ask insulation companies near you to look at the attic or walls and quote the job.
Blown-in insulation
| Job | Published range |
|---|---|
| Blown-in insulation in an attic | $1.65 to $2.40 per square foot1-2 |
| A typical blown-in job | $987 to $3,6001-4 |
| Blown-in insulation in existing walls | $1.75 to $3.50 per square foot of wall1, 3 |
For walls that are already closed up, ask how the company will get the insulation in, how it will patch the wall afterwards, and whether the patching is in the price.
In a home built before 1978, cutting holes in painted surfaces to blow insulation into the walls can bring the job under the EPA's lead-safe rule when it disturbs more painted surface than the minor-repair limits allow: 6 square feet per room inside, or 20 square feet outside.5 Ask whether the company is lead-safe certified.
Spray foam
| Job | Published range |
|---|---|
| Spray foam insulation | $1.50 to $5.00 per square foot6-9 |
Open-cell foam costs less per square foot than closed-cell foam.6 Spray foam companies often have a minimum charge, so a small job can cost more than its area suggests.6 Some cost guides also give spray foam prices by the board foot,8-9 which is a different measure: a board foot is one square foot of foam one inch thick. Ask for a price by the square foot to compare quotes.
Vermiculite in the attic
Vermiculite insulation looks like small pebbles and is usually gray-brown or silver-gold. If your attic has it, don't disturb it or remove it yourself. The EPA says to assume it contains asbestos and to use a trained professional if it has to come out.10
Prices we don't give
- Batts and rolls. Only one cost guide gives an installed price for batt insulation, and the others don't say whether theirs includes labor.
- One cost guide's attic blown-in rate. It's well above that same guide's attic insulation page and HomeGuide's attic figure, so we leave it out.
Each company on this site is listed with its phone number where it has one, so you can call two or three and compare. You can also send a request through the request form.
Ranges compiled from HomeGuide, Fixr, Angi and Thumbtack, checked October 2026.
Sources (10)
- HomeGuide: blown-in insulation cost ↑
- Fixr: blown-in insulation cost ↑
- Angi: blown-in insulation cost ↑
- Thumbtack: blown-in insulation cost ↑
- Electronic Code of Federal Regulations: 40 CFR 745.83 ↑
- HomeGuide: spray foam insulation cost ↑
- Fixr: spray foam insulation cost ↑
- Angi: spray foam insulation cost ↑
- Thumbtack: spray foam insulation cost ↑
- US Environmental Protection Agency: asbestos-contaminated vermiculite insulation ↑
